| Author |
Message |
|
mysty1971
|
Post subject: Re: Jaws ULTIMATE Pro 1.02  Posted: Wed Dec 26, 2018 5:16 am |
|
Joined: Sat Sep 24, 2011 12:33 pm
Posts: 188
|
|
these are my settings....... turned out to be 640x480 (keep it unchanged from windowed to full screen) it gets rendered so..... eventually it automatically sets everything ok !
You do not have the required permissions to view the files attached to this post.
|
|
  |
|
 |
|
mysty1971
|
Post subject: Re: Jaws ULTIMATE Pro 1.02 Posted: Wed Dec 26, 2018 5:20 am |
|
Joined: Sat Sep 24, 2011 12:33 pm
Posts: 188
|
|
This is how i wanted it ! centered in the middle, and full screen !! and nice graphics !!
Lets get a bite !!!
ps. my first steps were :
- de-installation of future pinball (with revo cleaner everything cleaned)
- did a clean install of BAM+FP.exe
- loaded up 1.01, tried some settings until ok, then loaded the same setting with 1.02
- YESSSSSSSSS that was (after lots of trying) the right thing to do.
pfew.......
Every-1 for help and input : THANX ! ! for thinking and helping a dutch pinball lover ! !
For now : a sharking good Christmas !!
You do not have the required permissions to view the files attached to this post.
|
|
| |
|
|
|
GeorgeH
|
Post subject: Re: Jaws ULTIMATE Pro 1.02 Posted: Wed Dec 26, 2018 5:47 am |
|
Joined: Thu Aug 16, 2012 11:12 pm
Posts: 2772
Location: Arkansas, USA
|
|
Your choices on "Editor Prefs" are correct.
The resolution 1920x1080 is higher than 1440 x 900. It looks like you are using a standard widescreen monitor. You can select a resolution that does not have the correct aspect ratio. You can select a resolution that has the wrong aspect ratio. If you divide the higher number by the lower number you should get 1.78 for widescreen. Don't use the 1440 x 900 because it divides out to 1.6 so you will have some black space on the screen that you don't want.
You probably didn't need to reinstall but I guess it doesn't hurt. Probably deleting the fpRam and cfg files is what really fixed it.
George
|
|
| |
|
|
|
mysty1971
|
Post subject: Re: Jaws ULTIMATE Pro 1.02 Posted: Wed Dec 26, 2018 10:05 am |
|
Joined: Sat Sep 24, 2011 12:33 pm
Posts: 188
|
GeorgeH wrote: Your choices on "Editor Prefs" are correct.
The resolution 1920x1080 is higher than 1440 x 900. It looks like you are using a standard widescreen monitor. You can select a resolution that does not have the correct aspect ratio. You can select a resolution that has the wrong aspect ratio. If you divide the higher number by the lower number you should get 1.78 for widescreen. Don't use the 1440 x 900 because it divides out to 1.6 so you will have some black space on the screen that you don't want.
You probably didn't need to reinstall but I guess it doesn't hurt. Probably deleting the fpRam and cfg files is what really fixed it.
George thanx for all the help !!  i am now on sharkhunt  lol...... the only other thing now, is that all slam!'s previous tables doesnt work that well anymore. tried the adams family, but argg... a slow ball and later on ended with a error. (also the 2.7 version didnt make the difference) ...thats for later to fix....... anyway thanx for your help from holland
|
|
| |
|
|
|
GeorgeH
|
Post subject: Re: Jaws ULTIMATE Pro 1.02 Posted: Wed Dec 26, 2018 10:55 am |
|
Joined: Thu Aug 16, 2012 11:12 pm
Posts: 2772
Location: Arkansas, USA
|
You're welcome Holland, land of my favorite coffee maker, Have you read my guide: viewtopic.php?f=84&t=6054Step 13 has a link to a BAM guide and Step 16 has a link to a list of my favorite tables. George
|
|
| |
|
|
|
mysty1971
|
Post subject: Re: Jaws ULTIMATE Pro 1.02 Posted: Fri Dec 28, 2018 3:20 am |
|
Joined: Sat Sep 24, 2011 12:33 pm
Posts: 188
|
GeorgeH wrote: You're welcome Holland, land of my favorite coffee maker, Have you read my guide: http://gopinball.com/forum/viewtopic.php?f=84&t=6054Step 13 has a link to a BAM guide and Step 16 has a link to a list of my favorite tables. George yesss i read it bit by bit very usefull and handy. one but.... : some links in the manual dont work. Mostly their the links like : viewtopic.php?f=84&t=6054 or where are .... (dots) involved. Like the link to the manual. i copied whole the manual to a word document. Then those things draw my attention. But....apart from that : a great manual ! !
|
|
| |
|
|
|
GeorgeH
|
Post subject: Re: Jaws ULTIMATE Pro 1.02 Posted: Fri Dec 28, 2018 2:30 pm |
|
Joined: Thu Aug 16, 2012 11:12 pm
Posts: 2772
Location: Arkansas, USA
|
|
| |
|
|
|
Flug
|
Post subject: Re: Jaws ULTIMATE Pro 1.02 Posted: Sat Dec 29, 2018 11:14 am |
|
Joined: Mon Sep 18, 2017 3:49 pm
Posts: 38
Location: Chicago, USA
|
|
Hey George. All 3 links actually worked for me.
_________________
--flug
|
|
| |
|
|
|
GeorgeH
|
Post subject: Re: Jaws ULTIMATE Pro 1.02 Posted: Sat Dec 29, 2018 2:26 pm |
|
Joined: Thu Aug 16, 2012 11:12 pm
Posts: 2772
Location: Arkansas, USA
|
Flug wrote: Hey George. All 3 links actually worked for me. Flug, Mysty1971 lives in Holland so I am thinking there may be something different about the way Europe accesses the site. George
|
|
| |
|
|
|
bgood
|
Post subject: Re: Jaws ULTIMATE Pro 1.01 Posted: Sat Jan 05, 2019 11:51 am |
|
Joined: Sun Feb 26, 2017 9:42 pm
Posts: 18
|
TerryRed wrote: This is a BAM default CFG that I have setup for cabinet as well.
The default.cfg goes into your BAM folder. Backup the current one just in case. This is setup similar to Jaws, and should get you a good default setup to use for most tables. Just open the BAM menu, goto the main menu, and choose “Reset to Default” to have a table use the settings on this file. Any table without a cfg will use the Default settings at first loading. Terry: This is quite timely (the confing files) and will help a lot as I'm in the process of trying to config Bam lighting for a Kinect set-up. This new BAM has a tone of settings that have vastly improved my tables. Great job by Ravar. Thanks for these files and your support of this community!
|
|
| |
|
|
|
