GoPinball.com
http://gopinball.com/forum/

Independence Day 1.1 error
http://gopinball.com/forum/viewtopic.php?f=84&t=10978
Page 1 of 1

Author:  Turk182 [ Fri Jun 07, 2019 12:03 pm ]
Post subject:  Independence Day 1.1 error

Hi all,

i tried to install independence Day 1.1 but when I launch it with BAM 254 I have error meditation line 248 this object doesn't allow FadeIn.

I gone to the line 248 and it's just a verification of the BAM version.

Can someone help me please ?

Author:  GeorgeH [ Fri Jun 07, 2019 12:29 pm ]
Post subject:  Re: Independence Day 1.1 error

I have BAM 254 installed and I'm not experiencing the problem. I looked at the fadein function in the script and could not find anything wrong. Did you somehow alter the HUD on the translite?

George

Author:  Gimli [ Fri Jun 07, 2019 3:11 pm ]
Post subject:  Re: Independence Day 1.1 error

Translite DMD doesn't fade in/out in FP. I discovered this in MB

Author:  Popotte [ Fri Jun 07, 2019 3:28 pm ]
Post subject:  Re: Independence Day 1.1 error

Gimli wrote:
Translite DMD doesn't fade in/out in FP. I discovered this in MB

But nothing fade in/out on the translite...

Author:  GeorgeH [ Fri Jun 07, 2019 5:38 pm ]
Post subject:  Re: Independence Day 1.1 error

The HUD fades in and out on my PC. There is no coding to fade MyDmdxxxxxx in or out.

Author:  Turk182 [ Fri Jun 07, 2019 5:52 pm ]
Post subject:  Re: Independence Day 1.1 error

I had to rename the HUD to have the real DMD on MyDMD and I named the HUD DMD MyDMDxxxx
Maybe this is the problem ?

Author:  GeorgeH [ Fri Jun 07, 2019 6:21 pm ]
Post subject:  Re: Independence Day 1.1 error

Yes that is the problem.

MyDmdxxxxxx is displayed on the translite. Fade in and Fade out is NOT supported for it. The HUD DOES support fade in and fade out. Swapping the two DMDs will produce an error.

Why are you swapping the 2? They both work. If you want to add the table to your pincab just turn the HUD off using the HUD toggle key. The setting is saved to the fpRam file.

Author:  Turk182 [ Sat Jun 08, 2019 8:27 am ]
Post subject:  Re: Independence Day 1.1 error

GeorgeH wrote:
Yes that is the problem.

MyDmdxxxxxx is displayed on the translite. Fade in and Fade out is NOT supported for it. The HUD DOES support fade in and fade out. Swapping the two DMDs will produce an error.

Why are you swapping the 2? They both work. If you want to add the table to your pincab just turn the HUD off using the HUD toggle key. The setting is saved to the fpRam file.


Ok, if both work I will let the name as the original. The thing is that sometime you have to rename them if not the real DMD doesn't work.
I will try so.

Thanks for your help

Stephane

Author:  GeorgeH [ Sat Jun 08, 2019 10:32 am ]
Post subject:  Re: Independence Day 1.1 error

Smoke used to code his table that only support one DMD. Francisco changed the code to make the DMD display on both DMDs at the same time.

Author:  Turk182 [ Sun Jun 09, 2019 11:07 am ]
Post subject:  Re: Independence Day 1.1 error

GeorgeH wrote:
Smoke used to code his table that only support one DMD. Francisco changed the code to make the DMD display on both DMDs at the same time.


Good to know ! Thank you again George !

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/